Inflator and Ignitor Test

Tank-Test

The HuDe Tank Test allows reproducible testing of gas generators and inflators under safe conditions. The test object is fixed in an airtight pressure tank and ignited. The resulting gas forms a pressure curve, which we can precisely measure and evaluate and analyze according to all standard methods (AK-LV, USCAR, etc.).
Of course, we adapt the volume of the can, the adaptation of the test items, the sensors and the test software to the particular needs of our customers.

Inflator and Ignitor Test

FINAL Tank

The FINAL test system is a different approach to evaluating the power and time performance of airbag inflators. Based on the inflator part only, the results of the FINAL test system shows the same differences as those observed in sled and crash tests. Compliance tests broken down for the inflator part now became possible.
For the purpose of substitution of airbags in vehicle safety parts production or after market issues the FINAL test system is a reliable, valid and cost efficient qualification tool.
The FINAL test data gives much better feedback and input to the CAE simulation department compared to the historic tank test results.

Inflator and Ignitor Test

Thermal Transient Tester / Ignition test

HuDe Thermal Transient testers are used in the assembly line of fuses for quality assurance. The ignition of the lighters takes place by means of ramping in the NoFire area. The thermal transient effect generated during energization is precisely recorded and evaluated.

Inflator and Ignitor Test

Energization instrument  resiSTORE

The current measuring device resiSTORE enables a simple and uncomplicated cyclic measurement of many igniter resistances. The detonators are connected to our measuring technology. Our own logger software then cyclically records the resistances of all candidates and stores them in the desired format.